Welcome to U.A.C. [O.S.A.]
login / register
Status: Guest
Архивы форума | iddqd.ru
Wolf 3D
ПравилаПравила ПоискПоиск
RAGE - технические проблемы, патчи, консоль, настройки 1, 2, 3, 4, 5, 6, 7  След.
   Список разделов - Doom 4, Rage - RAGE - технические проблемы, патчи, консоль, настройкиОтветить
АвторСообщение
StasBFG[iddqd]
-= DoomGod =-
Админ Форума
3025

Doom Rate: 2.25
Ссылка на пост №1 Отправлено: 10.10.11 16:43:09

Настоятельно рекомендуется использовать последние драйвера для игры в Rage!
NVIDIA: Forceware начиная с 285.58 для XP или 285.62 для Vista/Seven
ATI: Catalyst 11.10 или новее
1 2 2
Grue13
- Warrant Officer -
Next rank: = Warrant Officer = after 62 points
1098

Doom Rate: 1.08
Ссылка на пост №2 Отправлено: 10.10.11 18:14:35

Давайте сделаем две темы - в одной будем обмениваться отзывами и мнениями о геймплее, сюжете и прочем, во второй (этой) - чисто технические подробности.

Вопрос №1 - для последнего патча конфиг какой-нибудь улучшает качество? Моя карта GeForce GTX 470 1367Mb.
2 5 1
Justice]ASTS[
- Major -
Next rank: = Major = after 38 points
1932

Doom Rate: 1.2
Ссылка на пост №3 Отправлено: 10.10.11 18:16:13

Никак нет.

GT240M и GT335M-эффекта ноль,все то же мыло.
3 4
[LeD]Jake Crusher
UAC General
Next rank: Unavailable after 0 points
6545

Doom Rate: 1.56
Ссылка на пост №4 Отправлено: 10.10.11 18:20:04

Justice]ASTS[
Я так понимаю, у тебя мобильные (ноутбуковые) карточки, или нет?

Grue13 :
Вопрос №1 - для последнего патча конфиг какой-нибудь улучшает качество? Моя карта GeForce GTX 470 1367Mb.

Не уверен. Хотя в принципе, можешь попробовать поставить.
Nvidia вот-вот должны выложить драйвера для игры (ATi это уже сделала), так что ждём.
4 2
Justice]ASTS[
- Major -
Next rank: = Major = after 38 points
1932

Doom Rate: 1.2
Ссылка на пост №5 Отправлено: 10.10.11 18:21:12

Да,мобильные карты,одна на моноблоке,вторая на нетбуке.Ощутимой разницы от патча нет.Скорее всего буду ждать драйверов.
3 4
[LeD]Jake Crusher
UAC General
Next rank: Unavailable after 0 points
6545

Doom Rate: 1.56
Ссылка на пост №6 Отправлено: 10.10.11 18:30:57

Justice]ASTS[
Не уверен насчёт мобильных, тем более, без драйверов. У Grue13, я так понимаю, карта более полноценная, ПКшная (скажем так), так что попробовать стоит.

И да, чтобы народ не лазил по форумам, разыскивая конфиги - сброшу их сюда.

Ultra-end config: (представляю, какая нужна машина для такой конфигурации)

Скрытый текст:

//HD Config v2.0 By FusedCore
echo "^1 Loading the HD Config v2.0 by FusedCore..."
//cvar_restart //use this setting to use the games default settings
cvaradd s_lockListener -1; seta s_lockListener 0; echo "^1Setting the Cvar listener to unlock the settings so this game can use the config..."
seta jobs_numThreads 1; echo "^1Setting the threads..." //CPU Threads Use 0-12 for the number of threads your system has. Lower Numbers are better and Use this only if your having Stuttering or hanging.
seta com_videoRam "1024"; echo "^1Setting the Video memory size..." //sets the Video Card memory Set this to the amount you have in MB
//cvaradd com_synctotime -1; echo "^1Disabling the framelimiter..." //Use this command to disable the 60fps locker
//seta com_maxfps "60"; echo "^1Setting the fps to your settings..." //limits the frames to 60 can be changed to what you desire
seta fc_maxcachememoryMB; 1536 echo "^1Setting the File Cache size..." //Increases the default file cache size to completely eliminate the popins
seta image_anisotropy "16"; echo "^1Setting the Ansistropy Filtering..." //Using the highest setting here but you can set as 2, 4 or 8
seta image_usecompression 0; echo "^1Disabling the Image Compression..."
seta image_filter "GL_LINEAR_MIPMAP_LINEAR"; echo "^1Setting the image filtering..."
seta image_blend "GL_LINEAR_MIPMAP_LINEAR"; echo "^1Setting the image blending"
seta image_preload "1"; echo "^1Enabling preloaded Images..."//Use preload images when ever possible
seta image_lodbias "-1"; echo "^1Setting the image LoD..." //LoD settings
seta image_ignoreHighQuality "0"; echo "^1Setting the HQ images..." //Sets up for using HQ gfx
seta image_ignoreLowQuality "1" echo "^1Setting the LQ images..." //ignores the low textures
seta image_useCache "1"; echo "^1Setting the image cache..." //Enabled Cache to allow the textures to load properly without popping
seta image_cacheMegs "1024"; echo "^1Setting the cache maxsize..." //Cache size in Megabytes
seta image_cacheMinK "10"; echo "^1Setting the cache minsize..." //Cache minimum size in kilobytes
seta r_aspectRatio "1"; echo "^1Setting the Aspect Ratio..." // 0=4:3, 1=16:9, 2=16:10, 3=5:4 TFT, -1 custom
seta r_fullscreen "1"; echo "^1Setting the fullscreen option..."
//seta r_customAspectRatioV "10"
//seta r_customAspectRatioH "16"
seta r_swapInterval 1; echo "^1Setting the Vsync option..." //VSYNC 1 enabled, 0 diabled
seta r_useHighQualityPostProcess "1"; echo "^1Setting the HQ post proccessing..." //Fore High Quality post proccessing
seta r_shadowsHighQuality "1"; echo "^1Setting the HQ Shadows..." //Fore High Quality shadows
seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame
seta r_renderer "best" //highest rendering options
seta r_multiSamples "32"; echo "^1Setting the MultiSampling..." //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
seta r_useHBAO "1"; echo "^1Setting the Ambient occlusion..."
seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance.
seta r_visDistMult "1"
seta r_useMotionBlur "1"; echo "^1Setting the Motion Blur..." //use blur
seta r_skipBump "0"
seta r_skipSpecular "0"
seta r_skipNewAmbient "0"
seta r_shadows "1"; echo "^1Setting the Shadows..."
seta r_cgFragmentProfile "best"
seta r_cgVertexProfile "best"
seta vt_lodBias "-1"; echo "^1Setting the Visual Texture LoD..." //LoD settings
//below is cache settings And advanced GFX settings
echo "^1Setting the Textures type..."
seta vt_pageimagesizeuniquediffuseonly2 "8192"
seta vt_pageimagesizeuniquediffuseonly "8192"
seta vt_pageimagesizeunique "8192"
seta vt_pageimagesizevmtr "8192"
seta vt_maxPPF 64; echo "^1Setting the Pages per file..." //Set this to 64 for Quad-cores CPU's or higher, 16 or 8 for dual-cores CPU's
seta vt_preload "1"; echo "^1Setting the Visual Textures to Preload..."
//Begin Advanced GFX Filtering and Sharper Images. Comment these 3 lines out if you are having issues or don't like the way it looks.
echo "^1Setting the Visual Texture Filters"
//seta vt_filter "GL_NEAREST, GL_NEAREST_MIPMAP_LINEAR"
seta vt_envf "GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE"
seta vt_blend "GL_LINEAR_MIPMAP_LINEAR"
//End of Advanced GFX Filtering
seta vt_useCache "1"; echo "^1Setting the Visual texture cache..."
seta vt_cacheMegs "1024"; echo "^1Setting the cache maxsize..."
seta vt_cacheMinK "10"; echo "^1Setting the cache minsize..."
seta vt_ignoreHighQuality "0"; echo "^1Setting the HQ Visual Texture..."
seta vt_ignoreLowQuality "1"; echo "^1Setting the LQ Visual Texture..."
//Begin HD Settings
echo "^1 -Loading the HD Settings..."
seta vt_qualityhdplossless "1"
seta vt_qualityhdppower "1"
seta vt_qualityhdpspecular "1"
seta vt_qualityhdpnormal "0"
seta vt_qualityhdpdiffuse "1"
seta vt_qualitydctpower "100"
seta vt_qualitydctspecular "100"
seta vt_qualitydctnormal "100"
seta vt_qualitydctchroma "100"
seta vt_qualitydctluma "100"
seta vt_maxlockedpages "2048"
//HD Image settings
seta image_qualityhdplossless "1"
seta image_qualityhdppower "1"
seta image_qualityhdpspecular "1"
seta image_qualityhdpnormal "0"
seta image_qualityhdpdiffuse "1"
seta image_qualitydctpower "100"
seta image_qualitydctspecular "100"
seta image_qualitydctnormal "100"
seta image_qualitydctchroma "100"
seta image_qualitydctluma "100"
seta image_maxlockedpages "1024"
//End HD Settings
echo "^1 -HD Settings Loaded..."
//seta vt_maxaniso 4; echo "^1Setting the Visual Texture anisotropy..." //Set this to 0 if your having lots screen tarring issues and do NOT set this higher then 4 otherwise it will corrupt the Mega-Textures
echo "^1-If you Have seen NO Unknowns above this line then it has all been Loaded without errors-"
echo "^1 ...HD Config v2.0 by FusedCore Loaded, Enjoy the game!!!"



High-end config:

Скрытый текст:

//High-end Config v2.0 By FusedCore
echo "^1 Loading the High-end Config v2.0 by FusedCore..."
//cvar_restart //use this setting to use the games default settings
cvaradd s_lockListener -1; seta s_lockListener 0; echo "^1Setting the Cvar listener to unlock the settings so this game can use the config..."
seta jobs_numThreads 1; echo "^1Setting the threads..." //CPU Threads Use 0-12 for the number of threads your system has. Lower Numbers are better and Use this only if your having Stuttering or hanging.
seta com_videoRam "1024" ; echo "^1Setting the Video memory size..." //sets the Video Card memory Set this to the amount you have in MB
//cvaradd com_synctotime -1; echo "^1Disabling the framelimiter..." //Use this command to disable the 60fps locker
//seta com_maxfps "60"; echo "^1Setting the fps to your settings..." //limits the frames to 60 can be changed to what you desire
seta fc_maxcachememoryMB 1536; echo "^1Setting the File Cache size..." //Increases the default file cache size to completely eliminate the popins
seta image_anisotropy "16"; echo "^1Setting the Ansistropy Filtering..." //Using the highest setting here but you can set as 2, 4 or 8
seta image_usecompression 0; echo "^1Disabling the Image Compression..."
seta image_filter "GL_LINEAR_MIPMAP_LINEAR"; echo "^1Setting the image filtering..."
seta image_blend "GL_LINEAR_MIPMAP_LINEAR"; echo "^1Setting the image blending"
seta image_preload "1"; echo "^1Enabling preloaded Images..."//Use preload images when ever possible
seta image_lodbias "-1"; echo "^1Setting the image LoD..." //LoD settings
seta image_ignoreHighQuality "0"; echo "^1Setting the HQ images..." //Sets up for using HQ gfx
seta image_ignoreLowQuality "1" echo "^1Setting the LQ images..." //ignores the low textures
seta image_useCache "1"; echo "^1Setting the image cache..." //Enabled Cache to allow the textures to load properly without popping
seta image_cacheMegs "1024"; echo "^1Setting the cache maxsize..." //Cache size in Megabytes
seta image_cacheMinK "10"; echo "^1Setting the cache minsize..." //Cache minimum size in kilobytes
seta r_aspectRatio "2"; echo "^1Setting the Aspect Ratio..." // 0=4:3, 1=16:9, 2=16:10, 3=5:4 TFT, -1 custom
seta r_fullscreen "1"; echo "^1Setting the fullscreen option..."
//seta r_customAspectRatioV "10"
//seta r_customAspectRatioH "16"
seta r_swapInterval 1; echo "^1Setting the Vsync option..." //VSYNC 1 enabled, 0 diabled
seta r_useHighQualityPostProcess "1"; echo "^1Setting the HQ post proccessing..." //Fore High Quality post proccessing
seta r_shadowsHighQuality "1"; echo "^1Setting the HQ Shadows..." //Fore High Quality shadows
seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame
seta r_renderer "best" //highest rendering options
seta r_multiSamples "32"; echo "^1Setting the MultiSampling..." //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
seta r_useHBAO "1"; echo "^1Setting the Ambient occlusion..."
seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance.
seta r_visDistMult "1"
seta r_useMotionBlur "1"; echo "^1Setting the Motion Blur..." //use blur
seta r_skipBump "0"
seta r_skipSpecular "0"
seta r_skipNewAmbient "0"
seta r_shadows "1"; echo "^1Setting the Shadows..."
seta r_cgFragmentProfile "best"
seta r_cgVertexProfile "best"
seta vt_lodBias "-1"; echo "^1Setting the Visual Texture LoD..." //LoD settings
//below is cache settings And advanced GFX settings
echo "^1Setting the Textures type..."
seta vt_pageimagesizeuniquediffuseonly2 "8192"
seta vt_pageimagesizeuniquediffuseonly "8192"
seta vt_pageimagesizeunique "8192"
seta vt_pageimagesizevmtr "8192"
seta vt_maxPPF 64; echo "^1Setting the Pages per file..." //Set this to 64 for Quad-cores CPU's or higher, 16 or 8 for dual-cores CPU's
seta vt_preload "1"; echo "^1Setting the Visual Textures to Preload..."
//Begin Advanced GFX Filtering and Sharper Images. Comment these 3 lines out if you are having issues or don't like the way it looks.
echo "^1Setting the Visual Texture Filters"
//seta vt_filter "GL_NEAREST, GL_NEAREST_MIPMAP_LINEAR"
seta vt_envf "GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE"
seta vt_blend "GL_LINEAR_MIPMAP_LINEAR"
//End of Advanced GFX Filtering
seta vt_useCache "1"; echo "^1Setting the Visual texture cache..."
seta vt_cacheMegs "1024"; echo "^1Setting the cache maxsize..."
seta vt_cacheMinK "10"; echo "^1Setting the cache minsize..."
seta vt_ignoreHighQuality "0"; echo "^1Setting the HQ Visual Texture..."
seta vt_ignoreLowQuality "1"; echo "^1Setting the LQ Visual Texture..."
seta vt_maxaniso 4; echo "^1Setting the Visual Texture anisotropy..." //Set this to 0 if your having lots screen tarring issues and do NOT set this higher then 4 otherwise it will corrupt the Mega-Textures
echo "^1-If you Have seen NO Unknowns above this line then it has all been Loaded without errors-"
echo "^1 ...High-end Config v2.0 by FusedCore Loaded, Enjoy the game!!!"



Middle-end config:

Скрытый текст:

//Mid-end Config By FusedCore
echo "^1 Loading the Mid-end Config v2.0 by FusedCore..."
//cvar_restart //use this setting to use the games default settings
cvaradd s_lockListener -1; seta s_lockListener 0; echo "^1Setting the Cvar listener to unlock the settings so this game can use the config..."
seta jobs_numThreads 1; echo "^1Setting the threads..." //CPU Threads Use 0-12 for the number of threads your system has. Lower Numbers are better and Use this only if your having Stuttering or hanging.
seta com_videoRam "1024" ; echo "^1Setting the Video memory size..." //sets the Video Card memory Set this to the amount you have in MB
//cvaradd com_synctotime -1; echo "^1Disabling the framelimiter..." //Use this command to disable the 60fps locker
//seta com_maxfps "60"; echo "^1Setting the fps to your settings..." //limits the frames to 60 can be changed to what you desire
seta fc_maxcachememoryMB 1536; echo "^1Setting the File Cache size..." //Increases the default file cache size to completely eliminate the popins
seta image_anisotropy "8"; echo "^1Setting the Ansistropy Filtering..." //Using the highest setting here but you can set as 2, 4 or 8
seta image_usecompression 0; echo "^1Disabling the Image Compression..."
seta image_filter "GL_LINEAR_MIPMAP_LINEAR"; echo "^1Setting the image filtering..."
seta image_blend "GL_LINEAR_MIPMAP_LINEAR"; echo "^1Setting the image blending"
seta image_preload "1"; echo "^1Enabling preloaded Images..."//Use preload images when ever possible
seta image_lodbias "-1"; echo "^1Setting the image LoD..." //LoD settings
seta image_ignoreHighQuality "0"; echo "^1Setting the HQ images..." //Sets up for using HQ gfx
seta image_ignoreLowQuality "1" echo "^1Setting the LQ images..." //ignores the low textures
seta image_useCache "1"; echo "^1Setting the image cache..." //Enabled Cache to allow the textures to load properly without popping
seta image_cacheMegs "1024"; echo "^1Setting the cache maxsize..." //Cache size in Megabytes
seta image_cacheMinK "10"; echo "^1Setting the cache minsize..." //Cache minimum size in kilobytes
seta r_aspectRatio "2"; echo "^1Setting the Aspect Ratio..." // 0=4:3, 1=16:9, 2=16:10, 3=5:4 TFT, -1 custom
seta r_fullscreen "1"; echo "^1Setting the fullscreen option..."
//seta r_customAspectRatioV "10"
//seta r_customAspectRatioH "16"
seta r_swapInterval 1; echo "^1Setting the Vsync option..." //VSYNC 1 enabled, 0 diabled
seta r_useHighQualityPostProcess "1"; echo "^1Setting the HQ post proccessing..." //Fore High Quality post proccessing
seta r_shadowsHighQuality "1"; echo "^1Setting the HQ Shadows..." //Fore High Quality shadows
seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame
seta r_renderer "best" //highest rendering options
seta r_multiSamples "16"; echo "^1Setting the MultiSampling..." //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
seta r_useHBAO "1"; echo "^1Setting the Ambient occlusion..."
seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance.
seta r_visDistMult "1"
seta r_useMotionBlur "1"; echo "^1Setting the Motion Blur..." //use blur
seta r_skipBump "0"
seta r_skipSpecular "0"
seta r_skipNewAmbient "0"
seta r_shadows "1"; echo "^1Setting the Shadows..."
seta r_cgFragmentProfile "best"
seta r_cgVertexProfile "best"
seta vt_lodBias "-1"; echo "^1Setting the Visual Texture LoD..." //LoD settings
//below is cache settings And advanced GFX settings
echo "^1Setting the Textures type..."
seta vt_pageimagesizeuniquediffuseonly2 "8192"
seta vt_pageimagesizeuniquediffuseonly "8192"
seta vt_pageimagesizeunique "8192"
seta vt_pageimagesizevmtr "8192"
seta vt_maxPPF 64; echo "^1Setting the Pages per file..." //Set this to 64 for Quad-cores CPU's or higher, 16 or 8 for dual-cores CPU's
seta vt_preload "1"; echo "^1Setting the Visual Textures to Preload..."
//Begin Advanced GFX Filtering and Sharper Images. Comment these 3 lines out if you are having issues or don't like the way it looks.
echo "^1Setting the Visual Texture Filters"
//seta vt_filter "GL_NEAREST, GL_NEAREST_MIPMAP_LINEAR"
seta vt_envf "GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE"
seta vt_blend "GL_LINEAR_MIPMAP_LINEAR"
//End of Advanced GFX Filtering
seta vt_useCache "1"; echo "^1Setting the Visual texture cache..."
seta vt_cacheMegs "1024"; echo "^1Setting the cache maxsize..."
seta vt_cacheMinK "10"; echo "^1Setting the cache minsize..."
seta vt_ignoreHighQuality "0"; echo "^1Setting the HQ Visual Texture..."
seta vt_ignoreLowQuality "1"; echo "^1Setting the LQ Visual Texture..."
seta vt_maxaniso 2; echo "^1Setting the Visual Texture anisotropy..." //Set this to 0 if your having lots screen tarring issues and do NOT set this higher then 4 otherwise it will corrupt the Mega-Textures
echo "^1-If you Have seen NO Unknowns above this line then it has all been Loaded without errors-"



Low-end config:

Скрытый текст:

//Low-end Config v2.0 By FusedCore
echo "^1 Loading the Low-end Config v2.0 by FusedCore..."
//cvar_restart //use this setting to use the games default settings
cvaradd s_lockListener -1; seta s_lockListener 0; echo "^1Setting the Cvar listener to unlock the settings so this game can use the config..."
seta jobs_numThreads 0; echo "^1Setting the threads..." //CPU Threads Use 0-12 for the number of threads your system has. Lower Numbers are better and Use this only if your having Stuttering or hanging.
seta com_videoRam "1024" ; echo "^1Setting the Video memory size..." //sets the Video Card memory Set this to the amount you have in MB
//cvaradd com_synctotime -1; echo "^1Disabling the framelimiter..." //Use this command to disable the 60fps locker
//seta com_maxfps "60"; echo "^1Setting the fps to your settings..." //limits the frames to 60 can be changed to what you desire
seta fc_maxcachememoryMB 1536; echo "^1Setting the File Cache size..." //Increases the default file cache size to completely eliminate the popins
seta image_anisotropy "2"; echo "^1Setting the Ansistropy Filtering..." //Using the highest setting here but you can set as 2, 4 or 8
seta image_usecompression 0; echo "^1Disabling the Image Compression..."
seta image_filter "GL_LINEAR_MIPMAP_LINEAR"; echo "^1Setting the image filtering..."
seta image_blend "GL_LINEAR_MIPMAP_LINEAR"; echo "^1Setting the image blending"
seta image_preload "1"; echo "^1Enabling preloaded Images..."//Use preload images when ever possible
seta image_lodbias "-1"; echo "^1Setting the image LoD..." //LoD settings
seta image_ignoreHighQuality "1"; echo "^1Setting the HQ images..." //Sets up for using HQ gfx
seta image_ignoreLowQuality "0" echo "^1Setting the LQ images..." //ignores the low textures
seta image_useCache "1"; echo "^1Setting the image cache..." //Enabled Cache to allow the textures to load properly without popping
seta image_cacheMegs "1024"; echo "^1Setting the cache maxsize..." //Cache size in Megabytes
seta image_cacheMinK "10"; echo "^1Setting the cache minsize..." //Cache minimum size in kilobytes
seta r_aspectRatio "2"; echo "^1Setting the Aspect Ratio..." // 0=4:3, 1=16:9, 2=16:10, 3=5:4 TFT, -1 custom
seta r_fullscreen "1"; echo "^1Setting the fullscreen option..."
//seta r_customAspectRatioV "10"
//seta r_customAspectRatioH "16"
seta r_swapInterval 1; echo "^1Setting the Vsync option..." //VSYNC 1 enabled, 0 diabled
seta r_useHighQualityPostProcess "0"; echo "^1Setting the HQ post proccessing..." //Fore High Quality post proccessing
seta r_shadowsHighQuality "0"; echo "^1Setting the HQ Shadows..." //Fore High Quality shadows
seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame
seta r_renderer "best" //highest rendering options
seta r_multiSamples "8"; echo "^1Setting the MultiSampling..." //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
seta r_useHBAO "0"; echo "^1Setting the Ambient occlusion..."
seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance.
seta r_visDistMult "1"
seta r_useMotionBlur "0"; echo "^1Setting the Motion Blur..." //use blur
seta r_skipBump "0"
seta r_skipSpecular "0"
seta r_skipNewAmbient "0"
seta r_shadows "0"; echo "^1Setting the Shadows..."
seta r_cgFragmentProfile "best"
seta r_cgVertexProfile "best"
seta vt_lodBias "-1"; echo "^1Setting the Visual Texture LoD..." //LoD settings
//below is cache settings And advanced GFX settings
echo "^1Setting the Textures type..."
seta vt_pageimagesizeuniquediffuseonly2 "4096"
seta vt_pageimagesizeuniquediffuseonly "4096"
seta vt_pageimagesizeunique "4096"
seta vt_pageimagesizevmtr "4096"
seta vt_maxPPF 8; echo "^1Setting the Pages per file..." //Set this to 64
for Quad-cores CPU's or higher, 16 or 8 for dual-cores CPU's
seta vt_preload "1"; echo "^1Setting the Visual Textures to Preload..."
//Begin Advanced GFX Filtering and Sharper Images. Comment these 3 lines out if you are having issues or don't like the way it looks.
echo "^1Setting the Visual Texture Filters"
//seta vt_filter "GL_NEAREST, GL_NEAREST_MIPMAP_LINEAR"
seta vt_envf "GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE"
seta vt_blend "GL_LINEAR_MIPMAP_LINEAR"
//End of Advanced GFX Filtering
seta vt_useCache "1"; echo "^1Setting the Visual texture cache..."
seta vt_cacheMegs "1024"; echo "^1Setting the cache maxsize..."
seta vt_cacheMinK "10"; echo "^1Setting the cache minsize..."
seta vt_ignoreHighQuality "1"; echo "^1Setting the HQ Visual Texture..."
seta vt_ignoreLowQuality "0"; echo "^1Setting the LQ Visual Texture..."
//seta vt_maxaniso 2; echo "^1Setting the Visual Texture anisotropy..."
//Set this to 0 if your having lots screen tarring issues and do NOT set this higher then 4 otherwise it will corrupt the Mega-Textures
echo "^1-If you Have seen NO Unknowns above this line then it has all been Loaded without errors-"
echo "^1 ...Low-end Config v2.0 by FusedCore Loaded, Enjoy the game!!!"



За предоставленные конфиги говорим спасибо FusedCore'у и его теме на стимовском форуме.

Правда, говорят что после патча это может не сработать. Так что...

И да, некоторые цифры нужно редактировать, в зависимости от ваших конфигураций ПК, в частности это касается указания видео-памяти и 4 строки про pageimagesize.
4 2
Justice]ASTS[
- Major -
Next rank: = Major = after 38 points
1932

Doom Rate: 1.2
Ссылка на пост №7 Отправлено: 10.10.11 18:47:44

С мобильными картами посложнее-я думаю выйдут спустя месяц-полтора драйвера для моих карт,обе с какими-то хитрыми технологиями(переключения между двумя картами Intel и Nvidia).
3 4
fuke-kun]ASTS[
= Master Sergeant =
Next rank: - Sergeant Major - after 57 points
563

Doom Rate: 1.25
Ссылка на пост №8 Отправлено: 10.10.11 18:58:58

GTS 250, патч не помог.
2
[ToD]Ананасовый DooMер
= Corporal =
Next rank: - Lance Corporal - after 4 points
206

Doom Rate: 1.46
Ссылка на пост №9 Отправлено: 10.10.11 19:54:01

Эмм, в общем такая трабла с установкой: у меня установщик ругается и требует увеличить файл подкачки. Ну, увеличил я, перезагрузил, толку ноль. После просто перезагрузил, тот же эффект. Качал отсюда ссылка убрана. Скажи просто - пир. бухта. [LeD] Jake Crusher.
Вот еще скрин:


[LeD]Jake Crusher
UAC General
Next rank: Unavailable after 0 points
6545

Doom Rate: 1.56
Ссылка на пост №10 Отправлено: 10.10.11 20:56:09

[ToD]Ананасовый DooMер
...не люблю говорить, ну ладно. Rehash сделай.
4 2
Amsek
- UAC Gunner -
Next rank: = UAC Gunner = after 2 points
108

Doom Rate: 2.16
Ссылка на пост №11 Отправлено: 10.10.11 22:21:16

Доброго времени суток всем! :o Вот решил я скачать этот Рэйдж, многие советовали, но компьютер у меня достаточно слабый, как думаете, потянет ли на 2 ГБ ОЗУ, Intel Core 2 6300 1.87 ггц, видеокарта NVIDIA GeForce 7600 GT 256 мб.
Если потянет, то не могли бы подкинуть патч, или самый подходящий конфиг? Буду очень благодарен! :)
1
[ToD]Ананасовый DooMер
= Corporal =
Next rank: - Lance Corporal - after 4 points
206

Doom Rate: 1.46
Ссылка на пост №12 Отправлено: 11.10.11 07:23:09

Amsek
Конфигурация твоего компа ниже минимальных сис.требований. Не факт, что он rage потянет. Хотя попробовать можно.
Amsek
- UAC Gunner -
Next rank: = UAC Gunner = after 2 points
108

Doom Rate: 2.16
Ссылка на пост №13 Отправлено: 11.10.11 07:52:35

Скачал, установил, но при запуске приложения ничего не открывается и ошибок не показывает... Кто нибудь сталкивался с такой проблемой?
1
Justice]ASTS[
- Major -
Next rank: = Major = after 38 points
1932

Doom Rate: 1.2
Ссылка на пост №14 Отправлено: 11.10.11 08:08:43

Возможно стоит обновить директ,поставить vcredist,ну и заодно обновить драйвера аудио и видео.
3 4
Amsek
- UAC Gunner -
Next rank: = UAC Gunner = after 2 points
108

Doom Rate: 2.16
Ссылка на пост №15 Отправлено: 11.10.11 15:08:16

Может проблема в отсутствии звуковой карты? :o
Директ последний и драйвера для видеокарты вроде тоже...
1
Justice]ASTS[
- Major -
Next rank: = Major = after 38 points
1932

Doom Rate: 1.2
Ссылка на пост №16 Отправлено: 11.10.11 15:16:01

Возможно.Но тут уж ничего не поделаешь,ищи карту :o
3 4
Адский Дровосек
= Colonel =
Next rank: - Commissar - after 2 points
2588

Doom Rate: 1.77
Ссылка на пост №17 Отправлено: 12.10.11 16:15:03

Посмотрел тот ваш Rage: это именно так плохо как описывается, Кармак облажался по полной...
Hutt
= Sergeant =
Next rank: - Master Sergeant - after 13 points
487

Doom Rate: 1.27
Ссылка на пост №18 Отправлено: 12.10.11 16:35:14

Адский Дровосек
Это от тех самых кастомных настроек. Без них просто анрил - стайл подгрузка текстур, только очень долгая.
[LeD]Jake Crusher
UAC General
Next rank: Unavailable after 0 points
6545

Doom Rate: 1.56
Ссылка на пост №19 Отправлено: 12.10.11 16:38:29

Адский Дровосек
Ты бы сперва конфигурацию своего компьютера рассказал. А потом уже обвинял id software во всех смертных грехах :)
4 2
Justice]ASTS[
- Major -
Next rank: = Major = after 38 points
1932

Doom Rate: 1.2
Ссылка на пост №20 Отправлено: 12.10.11 16:51:04

Это новая технология,чего уж :vgavno: Надевай очки и в бой!



У меня тоже проблема бывает,на двух компах во время сохранения игра просто зависает.Спасает лишь CAD.Сталкивался кто?
3 4
Страница 1 из 7Перейти наверх 1, 2, 3, 4, 5, 6, 7  След.
   Список разделов - Doom 4, Rage - RAGE - технические проблемы, патчи, консоль, настройки

Игнор-лист
© iddqd.ru